How to Refill a Hayati Pro Ultra Plus 25K: A Step-by-Step Guide for Vapers

How to Refill a Hayati Pro Ultra Plus 25K: A Step-by-Step Guide for Vapers

The Hayati Pro Ultra Plus 25K is straightforward once you know the right method. After the disposable ban, high-puff pods of the type became common in the post-disposable market. It delivers up to 25,000 puffs, runs on a rechargeable battery, and uses mesh coils with dual-flavour options.

Most people just want clear advice on changing pods or dealing with a leaking tank. This device is not designed for pouring e-liquid from a bottle. The correct way is to swap the official Hayati Pro Ultra Plus refillable pod and auto-refill tanks. This helps avoid leaks, dry hits and burnt coils. In this guide, we show you how to do a proper pod replacement.

What is the Hayati Pro Ultra Plus 25K?

The Hayati Pro Ultra Plus 25K is just a rechargeable kit that uses replaceable pods and lasts a good while between changes. Each pack includes a 2ml prefilled mesh-coil pod and 2 x 10ml auto-refill containers. It uses an auto-transfer system where liquid feeds automatically from the tanks into the 2ml pod, keeping the coil saturated and staying within TPD limits. You keep the main battery unit and simply replace the pack when the liquid runs low. Most versions come with USB-C charging, a small display or LED indicator, and a mouthpiece that rotates to switch between the two flavour sides.

Can you refill the Hayati Pro Ultra Plus 25K?

Many people ask if they can refill the Hayati Pro Ultra Plus pod with a normal bottle of e-liquid. The short answer is no.  The pods are sealed and prefilled. There is no official fill port for topping them up. Trying to open or manually refill them often causes leaks or a burnt taste. The correct way to do a Hayati Pro Ultra Plus 25K refill is to replace the whole pack with a genuine Hayati Pro Ultra Plus replacement pod. This is how the device is designed to work. This keeps the device working properly and avoids the common problems that come with forced refilling.

What you need before refilling

Before you start, keep your Hayati Pro Ultra pod device ready along with a new Hayati Pro Ultra Plus replacement pod. It also helps to have a tissue or paper towel nearby in case of any small spills. You do not need e-liquid because these pods are sealed. Just swap the empty pod for a new Hayati Pro Ultra Plus refill pod.

How to refill the Hayati Pro Ultra Plus 25k: step-by-step 

The Hayati Pro Ultra Plus pod is not designed to be refilled with a bottle of e-liquid. It uses a 2ml prefilled mesh-coil pod with two 10ml auto-refill tanks. When the liquid runs low, you simply replace the whole pack with a genuine Hayati Pro Ultra Plus replacement pod.

  • Pull the empty pack straight out of the device.

  • Open the new pack and remove all stickers and silicone plugs.

  • Click the two 10ml tanks onto the 2ml pod, matching the colour coding.

  • Push the assembled pack into the device until it clicks into place.

  • Leave it upright for 10 to 15 minutes so the mesh coil can fully saturate.

  • Rotate the mouthpiece to choose your flavour and take a few gentle draws.

When to Replace the Pod?

Swap the pod as soon as it starts going downhill. You’ll usually notice a burnt taste, weaker flavour, less vapour, leaking, or some damage to the pod itself. A burnt taste means the coil is done, and if the flavour or vapour drops off, the liquid is probably running low. If it’s leaking or cracked, change it straight away. It’s much better to put in a new Hayati Pro Ultra Plus replacement pod than keep pushing an old one. A fresh set of Hayati replacement pods brings the flavour and vapour back properly. Once the pack is finished, dispose of it responsibly as e-waste.

How to Charge the Hayati Replacement Pods

The Hayati Pro Ultra Plus pod charges through a USB-C port, usually found on the side or bottom of the device. Use a normal USB-C cable with a low-power charger (under 10W works best). A full charge usually takes about 30 to 90 minutes. Avoid fast chargers, as they can put extra strain on the battery.

  • Don’t leave it plugged in overnight once it’s full

  • Keep the charging port clean and dry

  • Charge it on a hard, flat surface and don’t cover it while it’s charging

Common Hayati Pro Ultra Plus Problems

  • Device not working - usually a loose pack, low battery or dirty contacts

  • Leaking pod - often caused by a poor seal, damaged pack or leaving the device on its side

  • Weak flavour or weak vapour - normally means the pod is nearly empty or the coil is worn out

  • Burnt taste or dry hit - happens when the coil has dried out or wasn’t left to soak properly

  • Device not charging - usually a faulty cable, dirty USB-C port or using a fast charger

  • Flavour mixing - the mouthpiece hasn’t been fully turned on a dual-flavour pack

How to maintain your Hayati Pro Ultra Plus 25k

Give the mouthpiece and contacts a quick wipe with a dry tissue every few days. Keep the device upright and store it at normal room temperature.Try not to chain-vape; leaving a short break between puffs helps the coil last longer. On dual-flavour packs, switch sides now and then so both coils wear evenly. When the flavour starts dropping off, just swap the pack for a new one. Genuine Hayati Pro Ultra Plus replacement pods from Vapemoor work best. With the Vaping Products Duty coming in, looking after your device properly helps it last longer and keeps costs down.